OUR PRODUCTS
ARE MADE IN
THE U.S.A.
"WE SHIP ANYWHERE IN THE USA"
Town Series
Town Entrance Systems are low cost reproductions of colonial millwork that will enhance the most basic house. We mold the crossheads and pediments as one complete unit that saves installation time and eliminates the opportunity for water seepage. We have several different pilaster styles and sizes to choose from to meet your needs. The pilasters butt to the bottom of the crosshead and can be adjusted to varying jamb conditions as well as height requirements.
31-160 and 31-162 Pilasters (stock sizes: 120" and 140") are supplied with loose plinth blocks
and can be cut on the job site to accomodate sizes 91" to 120" and 121" to 144".
Fax, phone or email your ideas to us for a complete quote.
|
Click the images to enlarge them for detail.
|
Order Instructions
Step 1.
Determine the "D" Dimension. This is the distance between the side edge of your pilasters as they will be installed on the door jamb. ( SEE DETAIL 1.)
Step 2. See the Crosshead and Pediment Selection Chart below. Under Pilaster Widths, locate your "D" Dimensions if the "D" Dimension does not match exactly, there are 2 options below (A and B).
A) Select the next largest "D" Dimension, which will usually result in the crosshead overhanging the pilaster by an inch or less on ether side. For example, If your "D" Dimension is 35 1/2" select 36". B) Look to see if the "D" Dimension in another column matches your requirements. If so, this will require changing the width of the pilasters as noted at the top of the column above the location "D" Step 3.
To select a pediment that will work with the "D" Dimension and pilaster width, move to the right, under the heading "Description". There you will locate the different styles crossheads and crossheads & pediments available to fit your application.
Step 4. Locate the Pilaster Selection chart below. Using the width as determined by your "D" Dimension, select the style and height as required by your application.
|
|
Click on the image below to see an example of Crosshead and Crosshead/ Pediments Selection chart.
|
||
Crosshead and Pediment Selection Chart
| Pilaster Widths | Description | Item No. | Bottom
Width "B" |
Top
Width "T" |
Height
"H" |
Projection
"P" |
||||
| 3 3/4" | 4 1/2" | 5 1/4" | 6 3/4" | 7 1/2" | ||||||
| Single Door Openings | ||||||||||
| "D" Dimensions | 40" | 38 1/2" | 37" | 34" | 32 1/2" | Small Crosshead | 30-100-10 | 47 1/2" | 51 1/2" | 6" | 3" |
| Large Crosshead | 30-100-11 | 9" | ||||||||
| Combo Acorn | 30-100-12 | 20 3/4" | ||||||||
| Combo Sunburst | 30-100-13 | 19 7/8" | ||||||||
| Combo Plain | 30-100-23 | 19 7/8" | ||||||||
| Combo Peak | 30-100-14 | 19 5/8" | ||||||||
| Combo Rams Head | 30-100-15 | 25" | ||||||||
| 44 1/4" | 42 3/4" | 41 1/4" | 38 1/4" | 36 3/4" | Small Crosshead | 30-110-10 | 51 3/4" | 56 3/4" | 6" | 3" |
| Large Crosshead | 30-110-11 | 9" | ||||||||
| Combo Acorn | 30-110-12 | 211/2" | ||||||||
| Combo Sunburst | 30-110-13 | 19 1/2" | ||||||||
| Combo Plain | 30-110-23 | 19 1/2" | ||||||||
| Combo Peak | 30-110-14 | 19" | ||||||||
| Combo Rams Head | 30-110-15 | 25" | ||||||||
| 47 1/2" | 46" | 44 1/2" | 41 1/2" | 40" | Small Crosshead | 30-120-10 | 55" | 59" | 6" | 3" |
| Large Crosshead | 30-120-11 | 9" | ||||||||
| Combo Acorn | 30-120-12 | 21 1/4" | ||||||||
| Combo Sunburst | 30-120-13 | 22 5/8" | ||||||||
| Combo Plain | 30-120-23 | 22 5/8" | ||||||||
| Combo Peak | 30-120-14 | 23 1/4" | ||||||||
| Combo Rams Head | 30-120-15 | 25 3/4" | ||||||||
| 59" | 57 1/2" | 56" | 53" | 51 1/2" | Small Crosshead | 30-130-10 | 66 1/2" | 70 1/2" | 6" | 3" |
| Large Crosshead | 30-130-11 | 9" | ||||||||
| Combo Acorn | 30-130-12 | 24 7/8" | ||||||||
| Combo Sunburst | 30-130-13 | 22 1/4" | ||||||||
| Combo Plain | 30-130-23 | 22 1/4" | ||||||||
| Combo Peak | 30-130-14 | 221/8" | ||||||||
| Combo Rams Head | 30-130-15 | 28 1/2" | ||||||||
| 68" | 66 1/2" | 65" | 62" | 60 1/2" | Small Crosshead | 30-140-10 | 75 1/2" | 79 1/2" | 6" | 3" |
| Large Crosshead | 30-140-11 | 9" | ||||||||
| Combo Acorn | 30-140-12 | 24 1/4" | ||||||||
| Combo Sunburst | 30-140-13 | 24 1/4" | ||||||||
| Combo Plain | 30-140-23 | 24 1/4" | ||||||||
| Combo Peak | 30-140-14 | 25 1/8" | ||||||||
| Combo Rams Head | 30-140-15 | 28 1/2" | ||||||||
| 71 3/4" | 70 1/4" | 68 3/4" | 65 3/4" | 64 1/4" | Small Crosshead | 30-150-10 | 79 1/4" | 83 1/4" | 6" | 3" |
| Large Crosshead | 30-150-11 | 9" | ||||||||
| Combo Acorn | 30-150-12 | 24" | ||||||||
| Combo Sunburst | 30-150-13 | 23 1/4" | ||||||||
| Combo Plain | 30-150-23 | 24 1/4" | ||||||||
| Combo Peak | 30-150-14 | 31 3/4" | ||||||||
| Combo Rams Head | 30-150-15 | 28 5/8" | ||||||||
| 75 3/4" | 74 1/4" | 72 3/4" | 69 3/4" | 68 1/4" | Small Crosshead | 30-170-10 | 83 1/4" | 87 1/4" | 6 ' | 3" |
| Large Crosshead | 30-170-11 | 9" | ||||||||
| Combo Acorn | 30-170-12 | 26" | ||||||||
| Combo Sunburst | 30-170-13 | 25 1/4" | ||||||||
| Combo Plain | 30-170-23 | 25 5/8" | ||||||||
| Combo Peak | 30-170-14 | 25 5/8" | ||||||||
| Combo Rams Head | 30-170-15 | 28 5/8" | ||||||||
Pilaster Selection Charts
| Fluted Pilaster | Plain Pilaster | |||||||
| Item No. | Width | Stock
Height |
Custom
Height |
Item No. | Width | Stock
Height |
Custom
Height |
|
| 31-160-3-90 | 3 3/4" | 90" | - | 31-162-3-90 | 3 3/4" | 90" | - | |
| 31-160-3-120 | 3 3/4" | 120" | 91"-120" | 31-162-3-120 | 3 3/4" | 120" | 91"-120" | |
| 31-160-3-144 | 3 3/4" | 144" | 121"-144" | 31-162-3-144 | 3 3/4" | 144" | 121"-144" | |
| 31-160-4-90 | 4 1/2" | 90" | - | 31-162-4-90 | 4 1/2" | 90" | - | |
| 31-160-4-120 | 4 1/2" | 120" | 91"-120" | 31-162-4-120 | 4 1/2" | 120" | 91"-120" | |
| 31-160-4-144 | 4 1/2" | 144" | 121"-144" | 31-162-4-144 | 4 1/2" | 144" | 121"-144" | |
| 31-160-5-90 | 5 1/4" | 90" | - | 31-162-5-90 | 5 1/4" | 90" | - | |
| 31-160-5-120 | 5 1/4" | 120" | 91"-120" | 31-162-5-120 | 5 1/4" | 120" | 91"-120" | |
| 31-160-144 | 5 1/4" | 144" | 121"-144" | 31-162-144 | 5 1/4" | 144" | 121"-144" | |
| 31-160-6-90 | 6 3/4" | 90" | - | 31-162-6-90 | 6 3/4" | 90" | - | |
| 31-160-6-120 | 6 3/4" | 120" | 91"-120" | 31-162-6-120 | 6 3/4" | 120" | 91"-120" | |
| 31-160-6-144 | 6 3/4" | 144" | 121"-144" | 31-162-6-144 | 6 3/4" | 144" | 121"-144" | |
| 31-160-7-90 | 7 1/2" | 90" | - | 31-162-7-90 | 7 1/2" | 90" | - | |
| 31-160-7-120 | 7 1/2" | 120" | 91"-120" | 31-162-7-120 | 7 1/2" | 120" | 91"-120" | |
| 31-160-7-144 | 7 1/2" | 144" | 121"-144" | 31-162-7-144 | 7 1/2" | 144" | 121"-144" | |
| Mulls | Mulls | |||||||
| 31-160-8 | 1 1/2" | 84" | 31-162-8 | 1 1/2" | 84" | |||
| Panel Pilaster | Plain Panel Pilaster | Plinths | ||||||||
| Item No. | Width | Stock
Height |
Item No. | Width | Stock
Height |
Item No. | Width | Height | ||
| 31-161-5-90 | 5 1/4" | 90" | 31-163-5-90 | 5 1/4" | 90" | 32-160-3/32-162-3 | 33/4" | 15 7/8" | ||
| 31-161-5-120 | 5 1/4" | 120" | 31-163-5-120 | 5 1/4" | 120" | 32-160-4/32-162-4 | 41/2" | |||
| 31-161-5-144 | 5 1/4" | 144" | 31-163-5-144 | 5 1/4" | 144" | 32-160-5/32-162-5 | 51/4" | |||
| 31-161-6-90 | 6 3/4" | 90" | 31-163-6-90 | 6 3/4" | 90" | 32-160-6/32-162-6 | 63/4" | |||
| 31-161-6-120 | 6 3/4" | 120" | 31-163-6-120 | 6 3/4" | 120" | 32-160-7/32-162-7 | 71/2" | |||
| 31-161-6-144 | 6 3/4" | 144" | 31-163-6-144 | 6 3/4" | 144" | Please specify 160 or 162 | ||||
| 31-161-7-90 | 7 1/2" | 90" | 31-163-7-90 | 7 1/2" | 90" | |||||
| 31-161-7-120 | 7 1/2" | 120" | 31-163-7-120 | 7 1/2" | 120" | |||||
| 31-161-7-144 | 7 1/2" | 144" | 31-163-7-144 | 7 1/2" | 144" | |||||
| Mulls | ||||||||||
| 31-163-8 | 1 1/2" | 84" | ||||||||
Go to Catalog or
You may close this window when you are finished.
Feel free to print this page.
WECCO, Inc
10097 County Road 461 So.
Laneville, Texas 75667-9665
Phone: 903-854-2694
Fax: 903-854-2977
Copyright © 1999-2009 WECCO, Inc.
All Rights Reserved