The Custom Series are geared for the large home or commercial projects. We incorporate massive details with architecturally correct proportion to achieve entrances of a grand scale. We offer the pilasters in widths of 10", 11", and 12" and in heights up to 12 feet. We add a Broken Bonnet, Swelled Crosshead and a Triglyph Crosshead. The pilasters butt to the bottom of the crosshead and can be adjusted to varying jamb conditions as well as height requirements.

31-360 and 31-362 Pilasters (stock sizes: 120" and 140") are supplied with loose plinth blocks and can be cut on the job site to accomodate sizes 91" to 120" and 121" to 144".
 

	Click the images to enlarge them for detail.	Order Instructions   Step 1. Determine the "D" Dimension. This is the distance between the side edge of your pilasters as they will be installed on the door jamb. ( SEE DETAIL 1.) Step 2. See the Crosshead and Pediment Selection Chart below. Under Pilaster Widths, locate your "D" Dimensions if the "D" Dimension does not match exactly, there are 2 options below (A and B).   A) Select the next largest "D" Dimension, which will usually result in the crosshead overhanging the pilaster by an inch or less on ether side. For example, If your "D" Dimension is 35 1/2" select 36".   B) Look to see if the "D" Dimension in another column matches your requirements. If so, this will require changing the width of the pilasters as noted at the top of the column above the location "D" Step 3. To select a pediment that will work with the "D" Dimension and pilaster width, move to the right, under the heading "Description". There you will locate the different styles crossheads and crossheads & pediments available to fit your application. Step 4. Locate the Pilaster Selection chart below. Using the width as determined by your "D" Dimension, select the style and height as required by your application.
Click on the image below to see an example of Crosshead and Crosshead/ Pediments Selection chart.